13
USE
ARRANGEMENT OF THE HEATING ELEMENTS
Model: 60 cm.
FRONT
BACK
Every time the hob is reconnected to the electricity supply, the control panel lock
is active and the
relative led in on.
After removing the control panel lock (by pressing the
symbol for 1 second), switch on the hob by
pressing the key
for a few seconds.
If no function is activated within 10 seconds, the hob will switch off automatically.
The associated heating element is indicated next to every control area. Identify the heating element to
activate
and then activate it using the
and
keys, regulating the level of cooking required on a
scale o 1 to 9. With the heating element set on 9 it is possible, pressing the
, key, to activate the “fast
boil” function (booster), indicated with a P on the display. The heating element will work at maximum power
for 10 minutes, after which it will return to level 9, issuing a beep.
TIMER
There is a timer for setting cooking times from 1 to 99 minutes (symbol ).
After activating the cooking area required, selecting it on the display, activate the timer by pressing the
or
symbol above the
symbol. Then return to the heating element to be programmed by
pressing its
or
symbol. Return to the timer and set the programming time using the
or
symbol. The programmed heating element is highlighted by the corresponding led above the cooking level
indicator.
The timer will start 5 seconds after the last symbol has been pressed and the heating element will operate
until the number on the display reaches 0. The heating element will then switch off automatically. When the
time ends a sequence of beeps will be repeated at 3 second intervals for 1 minute.
During timed cooking it is possible to change the operating power and the cooking time. Every time the
or
symbols of the cooking area are pressed, the heating element operating power is increased or
reduced. To change the amount of time remaining, it is necessary to press the
or
symbol of the
heating element until the led position in the cooking area switches on. Then the operating time can be
changed using the
and
symbols of the timer.
