Dudek Nucleon WRC, Руководство пользователя

Страница: 40 / 44

T
ake of
f
Thermalling
Brakes/ALC TEA
as
TST
Speed bar
ALC
T
oggle
TRIM
FULL
REFLEX
MODIFIED
REFLEX
with moderation
possible use
recommended
do not use
SLOW
F
AST
Thermalling the Nucleon is safe at any trim setting. However
, the
best sink rate is achieved with the trims fully closed on slow
.
T
o
thermal in turbulence, appropriate release of the trims to a faster setting is recommended to increase stability
.
In nil wind conditions, it is preferable to take of
f with the trims fully
closed on Slow
.
The stronger the wind, the faster the trim setting
towards the neutral "0" position. Faster trim settings can render the take of
f dif
ficult or even impossible, depending on wind strength.
The
ALC steering balls allow for lighter handling when used
together with the brakes, especially useful at faster trim settings and/or on speed bar
.
They can also be used on their own to
change direction, when not too low near the ground. In case of harnesses using high hangpoints the
TEA
system can
be used for directional control as well, especially at fast trim and speed system settings. It works in the same way as
TST
used in
our earlier paragliders. Remember though, that
TEA
must be
assembled on both sides to use it in this character
.
The speed bar should be used on faster trim settings. It should be avoided on slow trims (zero or slower) when the wing is not in a full reflex configuration, as the risk of collapse may be increased in turbulence.
- trim usage information
version 16.04.2009