To Install the New Upper Chute
Position the new upper chute as shown in figure 10. On figure 11, you will see a more
detailed depiction of the base of the chute in proper position.
Feed the supplied bolt through the hole in the base of the chute from underneath as seen in
figure 12. From the top, place the washer and nut on the other end of the bolt and tighten.
See figure 13.
Remove the screw and washer from the tab on the left side of the new chute, shown in
figure 14.
Remove the screw and washer from the upright support shown in figure 15.
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
Figure 15
