To Remove The Upper Chute
Lower the upper head of the machine
to a lowered position, ensuring that the
chute shuttles back on the machine
such as in figure 8.
Remove the upper chute by removing
the 2 screws and 1 bolt in figure 9.
To Install the New Lower Chute
(Cont.)
Using the supplied screws, attach the
side tabs of the chute to the stabilizing
arms shown in figure 6.
Position the new pusher cover as shown
in figure 7 and secure with 4 supplied
screws and washers (note that the 2
longer screws go towards the front and
the 2 shorter screws go towards the rear).
Figure 6
Figure 8
Figure 9
Figure 7
