Duco IQ-unit, Быстрый старт

Страница: 109 / 112

109
ENGLISH
8B.
NightBoost
Duco’s NightBoost function is used to set the ventilation system during
the summer to assist in cooling down high indoor temperatures.
This fully automatic smart (night) cooling function temporarily deac-
tivates demand control at indoor temperatures of 24 °C and over, and
causes the system to operate at nominal value. Not only does this
reduce the risk of overheating, it also reduces the need for cooling.
Smart NightBoost algorithms ensure energy-efficient operation with-
out disturbing night rest.
When using ‘Tronic’ window ventilators, outdoor temperature is also
measured for even greater operating efficiency in the NightBoost
function.
NightBoost is not activated as standard in the IQ-unit. Ensure the time
of day has been set (see section 8A) and complete the following steps
to activate NightBoost:
>Config
>NghtBst
>Mode
ON
Confirm using Enter ( ).