8
ENGLISH
L2000641 Installation guide for DucoBox Silent (Revision G | 17.07.2019)
06.C
LED indications
RED (blinking slowly)
Not in network
RED (blinking rapidly)
Logging in
GREEN (blinking slowly)
In network
GREEN (blinking rapidly)
In network, waiting for associated components
YELLOW (clignotement rapide)
Transitional phase (please wait)
YELLOW (on) Initialising (system
configuration in progress)
WHITE or OFF
Normal
BLUE
Component is displayed if changes are being put through via the master�
ORANGE
The system is not working correctly because the DucoBox has not been calibrated� Restart the
DucoBox� Follow the guidelines in ‘10 essential tips’ if the problem recurs continually�
06.D
Setting type of home
Setting the type of home and number of occupants correctly will provide the ventilation system with a better basis to adjust the
mid-position� There are two types of home: low-rise (e�g� a house) and high-rise (e�g� a flat)� Configuration of this component is
obligatory in the Netherlands. The standard setting for a DucoBox is as a low-rise home for 4 (or more) occupants�
Setting type of home
1
Ensure that ‘Installer Mode’ has been activated (via the ‘INST’ button)�
2
Press ‘LOW’ for a low-rise or ‘HIGH’ for a high-rise home�
3
The yellow LED (see illustration) will flash in a pattern that indicates the
number of occupants: Once, twice (applies for 3 occupants as well) or 4
times (applies for 4 occupants or more)� Press ‘LOW’ or ‘HIGH’ respectively
again until the LED pattern matches the correct number of occupants�
4
Press the ‘INST’ button to exit ‘Installer mode’�
or
HIGH
LOW
INST
