11
ENGLISH
L2000631 Installation guide for DucoBox Focus (Revision J | 17.07.2019)
07.D
Removing / replacing components
Removing paired components from the network or replacing is only possible within 30 minutes after the component is paired in
or is restarted� Restarting can be done by disconnecting the power for a moment� After a time-span of 30 minutes, remove and
replace operations are ignored� This is valid for all components from date of manufacture
170323
�
Removing a component
1
Activate ‘Installer mode’ by
long-pressing 2 diagonal buttons
on a paired control� The LED will
flash green or yellow rapidly�
5 sec
2
Press once and hold a button on
the component to be removed in
order to remove it from the net-
work� NB: any underlying compo-
nents will also be removed from
the network.
5 sec
3
Deactivate ‘Installer mode’ by
pressing the 4 buttons on a paired
control simultaneously (or using
the palm of your hand on a control
featuring touch buttons)� The LED
will turn white�
Replacing a component
1
Activate ‘Installer mode’ by
long-pressing 2 diagonal buttons
on a paired control� The LED will
flash green or yellow rapidly�
5 sec
2
Press briefly twice on the button
of the component to be replaced�
2x
OLD
3
Tap once on the button for the new
component� The latter will take on
all settings / connections in the
network�
1x
NEW
3
Deactivate ‘Installer mode’ by
pressing the 4 buttons on a paired
control simultaneously (or using
the palm of your hand on a control
featuring touch buttons)� The LED
will turn white�
07.E
Tips
• Removing all components from the network (e.g. in the event of problems): Activate ‘Installer mode’ and
long-press ‘INST’
until the LED starts flashing red� The DucoBox will reboot and the LED will stop flashing�
• Restoring factory settings for the DucoBox and all paired components (AS FROM DucoBox version 18xxxx): Long-press
‘INST’
and ‘ENTER’
if not in ‘Installer mode’� The network remains in place�
• Use the Duco Network Tool to read out information from components�
