K E E P I N S T R U C T I O N S FO R F U T U R E U S E
Please check contents against the components list in
these instructions. Also, please ensure there was no
damage that may have occurred in shipping.
If any components are missing or you � find any dam-
age, please contact ducduc before continuing.
Please remember to securely tighten all bolts
and fasteners, and periodically check to make sure
every component is properly and securely in place
and all bolts and fasteners are tight.
Read all the instructions before use of the CRIB.
Pay close attention to the safety warnings in
these instructions and on CRIB labels.
th a n k yo u fo r s e l e c ti n g a d u c d u c p ro d u c t
A minimum of two people is required to safely
assemble and move the CRIB. Do not attempt to
move this CRIB alone - dragging or sliding it across a
�floor may cause structural damage.
CAUTION:
Any mattress
used in this CRIB must
be at least 27
1/4
inches
by 51
5/8
inches with a
thickness not exceeding
6 inches.
8/10/2011
alex CRIB
