The mattress height should be lowered as your baby grows to ensure that he/she does not
climb out of the CRIB. When child is able to pull to standing position, set mattress to
lowest position and remove bumper pads, large toys and other objects that could serve
as steps for climbing out. Regularly assess your baby’s abilities and make
adjustments accordingly.
operation
Do not scratch or chip the
�
finish. Do not use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. Rinse and dry thoroughly. If you ever re
�
finish this
furniture, be sure to use only a non-toxic
�
finish specif
�
ed for children’s furniture.
To adjust the height of the mattress support
, remove the mattress from the crib.
Unscrew all four MATTRESS SUPPORT BOLTS
D
,remove all LOCKING WASHERS
and reinsert the smooth ends of each MATTRESS SUPPORT PIN in mattress-support-holes
on SIDE RAILS at desired height. Refer to steps 8 through 10 for reinserting
MATTRESS SUPPORT PANEL and reattaching, REGULAR WASHERS
LOCKING WASHERS , and MATTRESS SUPPORT BOLTS .
Periodically check to make sure every component is properly and securely in place
�
and all bolts and fasteners are tight.
Store crib in a dry area.
and REGULAR WASHERS ,and remove MATTRESS SUPPORT PANEL . Remove
J.1
I.1
C
E
B
C
J.1
D
I.1
