Ducati SUPERBIKE 1299 PANIGALE S Скачать руководство пользователя страница 97

Страница: 97 / 336

DTC - DWT - EBC function level quick

change

The instrument panel allows the rider to quickly

change the level set for one of the DTC, DWC or EBC

functions, by means of the UP + (5) and DOWN − (6)

buttons on the auxiliary LH switch.

Attention

Using the UP or DOWN buttons while riding

could result in dangerous situations, since it

immediately changes the triggering threshold of the

currently associated function: traction control (DTC),

wheelie control (DWC), engine brake control (EBC).

On your vehicle this setting can be changed while

riding, regardless of the throttle twistgrip position:

use this control carefully in order to avoid any

dangerous situation. You are advised against using

the UP or DOWN buttons while riding the motorcycle.

Ducati shall not be liable for any loss or damage

whatsoever linked to or connected with the

Customer or third parties disabling or manually

setting the riding aid functions.

The function associated with the UP + (5) and DOWN

− (6) buttons must be set through the Setting Menu.

The rider is always aware of which function is

currently associated with the UP + (5) and DOWN −

(6) buttons since it is highlighted on the main screen

with a thicker border line.

Note

Quick selection UP ( + ) and DOWN ( − ) buttons

are active only for the RACE Riding Mode.

Note

Any new level set by means of the UP ( + ) and

DOWN ( − ) buttons is stored in the RACE Riding

Mode as new setting for the associated function.

Содержание SUPERBIKE 1299 PANIGALE S

















































































































































































































































































































































Результаты поиска

Содержание SUPERBIKE 1299 PANIGALE S

Отзывы:

Бренды по названию

Популярные бренды

Ducati SUPERBIKE 1299 PANIGALE S, Руководство пользователя

Результаты поиска

Содержание SUPERBIKE 1299 PANIGALE S

Отзывы:

Бренды по названию

Популярные бренды