Ducati Pro-I Evo Black Edition, Руководство пользователя, Страница: 8 / 368

07
DANGER
IThe brakes may become hot during use. Do not touch after use.
Assembled item, the handlebar must be installed using the special screws contained in the package.
Model Reference picture In the package Handlebar assembly
Pro-I Evo Black
edition
Pro-I Evo White
edition
Accessories:
- Allen wrenches
- 4 screws forhandlebars
- Spare air chamber
- Spare sticker
- Tyre inflation adapter
- Charger Insert the 4 screws manually
without tightening them, then
use the hex wrench supplied to
tighten them and secure the
handlebars.
Pro-II Plus
Pro-II Evo
Accessories:
- Allen wrenches
- Components for handlebar
assembly (hook, plastic
parts, 4 screws)
- Tyre inflation adapter
- Charger
Steps:
1. Open the kickstand
2. Pick up the handlebar, place
the lever in the closed position
and lower the safety ring.
3. Install the handlebar on
the shaft
4. Install the hook (see photo)
by approaching it to the rod,
making sure that it is aligned
with the holes, then insert
the screws.
5. Insert the screw on the
outside into the hole located
under the control panel.
6. Tighten the screws.
7. Align the plastic plate (see
photo) with the second hole/
profile of the control panel,
then insert and tighten the
screw.
2. Package contents and assembly