Ducati Multistrada 1200S Pikes Peak, Руководство пользователя

Страница: 119 / 278

DSS default setting can be changed using the
corresponding menu through the instrument panel.
This menu allows the rider to increase or decrease
the base damping settings characterizing the
operation of fork and rear shock absorber for every
Riding Mode. When SOFT setting is selected, the
DSS will change the suspension settings so as to be
generally softer; while when HARD setting is
selected, the DDS will change the suspension
settings so as to be generally harder.
The DSS also interfaces with the vehicle load setting,
which can range from rider only to rider and
passenger with luggage. This means that changing
the load setting not only affects the rear shock
absorber preload - in order to always ensure ideal
handling even with luggage onboard - but it also
affects the parameters determining vehicle dynamic
control. So, selecting the correct load setting allows
a perfect response and handling considering the
dynamics generated when riding with luggage. It is
possible to change the base setting even for the
preload, thanks to the specific menu in the
instrument panel. The preload actuator range is 12
mm, the instrument panel allows preload adjustment
through 24 positions, which means that every
position corresponds to a preload change of 0.5 mm.
This should ensure the rider to find the perfect setting
under any load condition.
Attention
The DSS setting greatly depends on the load
setting. Riding the motorcycle with a load setting that
does not match the actual load conditions does not
guarantee optimum operation of the system.
The DSS was calibrated using the standard springs of
the motorcycle. Any change to the parts involved in
this system could impair optimum operation of the
system and motorcycle.
116