57
E
Fit a new bulb (4, fig. 50).
Notes
Do not touch the transparent part of the bulb with your
fingers, this will darken it and cause a loss of brightness.
Insert the tabs on the bulb base into the corresponding slots
in the bulb housing to ensure the bulb is correctly positioned;
hook the end of the clip (3, fig. 49) on to the headlight
mountings. Reconnect the wiring.
To renew the side light bulb, detach the wiring connector.
The bulb (5, fig. 51) is of the bayonet type: push it in and turn
it anti-clockwise to remove it. Push the new bulb in and turn
it clockwise until it clicks into place. Reconnect the wiring
connector and replace the lens/reflector assembly.
4
fig. 50
1
fig. 51