Ducati MONSTER 797 2017 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 219

Ducati MONSTER 797 2017 Скачать руководство пользователя страница 3

This manual forms an integral part of the motorcycle and must be kept with it for its whole service life.

If the motorcycle is resold, the manual must always be handed over to the new owner.

This manual must be preserved with care. If it is lost or becomes damaged, contact a Ducati Dealer or

authorised Service Centre without delay to obtain a new copy of the manual.
The quality standards and safety of Ducati motorcycles are steadily improved as new design solutions,

equipment and accessories are developed. While the information contained in this manual is current at the

time of going to print, Ducati Motor Holding S.p.A. reserves the right to make changes at any time without

notice and without any obligations. For this reason, the illustrations in this manual might differ from your

motorcycle.
Any and all reproduction or spreading of the contents herein in whole or in part is forbidden. All rights reserved

to Ducati Motor Holding S.p.A. Any request for written authorisation shall be addressed to this company,

specifying the reasons for request.
Enjoy your ride!

2

«
1
2
3
4
5
...
»

Содержание MONSTER 797 2017




























































































































































































































Отзывы:

Нет отзывов