Ducati MONSTER 696 Скачать руководство пользователя страница 12

Страница: 12 / 182

Rider's training

Accidents are frequently due to inexperience. Riding,

maneuvering and or braking are carried out differently

from other vehicles.

Attention

A rider's lack of preparation or an inappropriate

use of the vehicle may result in a loss of control, death

or serious damage.

Be sure you know the "RULES OF THE ROAD",

carefully read and familiarize with the contents of the

M.O.M. (Motorcycle Operator Manual) for

information on your State and which can be viewed

on the M.S.F. (Motorcycle Safety Foundation)

website (www.msf-usa.org).

You are strongly recommended to take a riding

course approved by the M.S.F. (Motorcycle Safety

Foundation).

Apparel

Clothing in the use of the motorcycle plays an

important role in safety, as the motorcycle provides

a person no protection from impact in the same way

as an automobile.

Suitable clothing includes: helmet, eye protection,

gloves, boots, long-sleeved jacket and long pants.
-

The helmet must have the requisites as listed on

page 8, if the helmet model has no visor, use

suitable goggles;

Gloves must have five fingers and be made of

leather or other abrasion-resistant material;

Boots or shoes used for riding must have non-slip

soles and ankle protection;

Jacket and pants, or even riding suits, must be

made of leather or abrasion-resistant material

and in a color with inserts that are very visible.

Important

In any case, avoid wearing loose or floppy

clothing that can become stuck in the motorcycle

parts.

Important

For your safety this type of clothing must be

used in both summer and winter.

Содержание MONSTER 696























































































































































































Результаты поиска

Содержание MONSTER 696

Отзывы:

Ducati MONSTER 696, Руководство пользователя, Страница: 12 / 182

Результаты поиска

Содержание MONSTER 696

Отзывы: