Head unit: camshafts
19 Bearing
20 Cap
21 Screw
22 Horizontal head camshaft
23 Copper gasket
24 Screw
25 Intake valve cover
26 Circlip
27 Spacer
28 Aluminium gasket
29 Ring nut
30 O-ring
31 Sensor mount
32 Sensor
33 Nut
34 Intake duct
35 O-ring
36 Rubber cap
37 Peg
Spare parts catalogue
Head : timing
Vertical head
Horizontal head
Inlet dict
Caution
Bold reference numbers in this section identify parts shown in this exploded view diagram. These parts do not appear
in the figures near the text.
Removing the engine oil temperature sensor
Operations
Reference See Section
Disconnect oil temperature sensor
from main wiring harness
P 1,
Arrangement of wiring on frame
Note
This operation can be carried out even if engine is on the frame. For precision purposes, the figures show the head
removed from the engine.
The engine oil temperature sensor (32) is placed on the intake valve cover (25) of the horizontal head (
11
).
Remove the rubber cap (36) and take the sensor (32) off its mount (31).
file:///C|/Documents%20and%20Settings/F4i/My...anual/wsm/usa/Mon695_MY07_N_4C9_00.64.1.html (2 of 18) [10/7/2008 8:45:35 PM]