Ducati MONSTER 1200 Скачать руководство пользователя страница 184

Страница: 184 / 344

F.A.Q.

1) Why don't I receive any notification of received e-

mails?

E-mails are notified only if configured on the

telephone source application. Check also that your

phone supports the MAP profile.

If so, the DUCATI MULTIMEDIA SYSTEM, during the

pairing phase, will send an access request to such

profile which can be notified to the user explicitly

(depending on the operating system) by requesting

access authorisation to message notifications.
2) Why don't I receive any notification of received

messages?

Check that your phone supports the MAP profile.

If so, the DUCATI MULTIMEDIA SYSTEM, during the

pairing phase, will send an access request to such

profile which can be notified to the user explicitly

(depending on the operating system) by requesting

access authorisation to message notifications.
3) Earphones do not connect. Why?

If they have been already paired once, we

recommend resetting the earphones and pair them

again with the motorcycle (see earphones

instruction manual).

4) When I receive a call, the instrument panel

displays the caller number but not the name

(despite being saved in the contact list).

Check that the phone supports the PBAP profile.

If so, the DUCATI MULTIMEDIA SYSTEM, during the

pairing phase, will send an access request to such

profile which can be notified to the user explicitly

(depending on the operating system) by requesting

access authorisation to the phone contact list.
5) By activating the Player through the instrument

panel, music does not start.

The activation depends on the phone settings. In

this case, after activating the Player through the

instrument panel, also start the music application on

your Smartphone.
6) It happens that the music is played with

continuous interruptions.

If the devices have just been connected, it may be

that the Bluetooth control unit is still completing the

connection phase with the concerned devices. It is

furthermore necessary to activate the PBAP and

MAP profiles. Therefore, in case of iOS, please refer

to point 7). In case of Android, please refer to points

2)4)

183

Содержание MONSTER 1200

























































































































































































































































































































































Результаты поиска

Содержание MONSTER 1200

Отзывы:

Похожие инструкции для MONSTER 1200

Бренды по названию

Популярные бренды

Ducati MONSTER 1200, Руководство пользователя

Результаты поиска

Содержание MONSTER 1200

Отзывы:

Похожие инструкции для MONSTER 1200

Бренды по названию

Популярные бренды