Ducati Hypermotard 950 Скачать руководство пользователя страница 21

Страница: 21 / 288

Intended use

Attention

This motorcycle is designed for on-road use,

may be used occasionally on dirt trail. Usage in

conditions for which it was not designed (e.g. heavy

off-road use) can lead to loss of control of the

motorcycle, increasing the risk of a crash.

Attention

This motorcycle may not be used to tow any

trailers or with a side-car attached; this can lead to

loss of control and result in an accident.
This motorcycle carries the rider and can carry a

passenger.

Attention

The total weight of the motorcycle in running

order including rider, passenger, luggage and

additional accessories should not exceed 375 kg /

826.73 lb.

Important

Using the motorcycle under extreme

conditions, such as very damp and muddy roads or

dusty and dry environment, could cause above-

average wear of components like the drive system,

the brakes or the air filter. If the air filter is dirty, the

engine could get damaged. Therefore, this might

translate in required service or replacement of the

wear parts earlier than specified in the scheduled

maintenance chart.

Rider's obligations

All riders must hold a valid licence.

Attention

Riding without a licence is illegal and is

prosecuted by law. Always make sure you have your

licence with you when riding. Do not let

inexperienced riders or persons without a valid

licence use your motorcycle.
Do not ride under the influence of alcohol and/or

drugs.

Attention

Riding under the influence of alcohol and/or

drugs is illegal and is prosecuted by law.

Содержание Hypermotard 950

































































































































































































































































































Результаты поиска

Содержание Hypermotard 950

Отзывы:

Бренды по названию

Популярные бренды

Ducati Hypermotard 950, Руководство пользователя

Результаты поиска

Содержание Hypermotard 950

Отзывы:

Бренды по названию

Популярные бренды