Ducasa Smart Command Tevolve, Инструкция по установке и эксплуатации

Страница: 7 / 16

7
Energy Monitor
Installation (Must be performed by an electrician)
Switch off the power supply to your control panel .
If you have various circuits, disconnect the
circuit breaker where you are going to make the
connection .
• To operate correctly the Gateway needs an Internet
connection via a broadband router . The equipment can
operate with broadband networks, cables and others, and in
most cases, no set up in the router is necessary .
• If there are any connection problems or if operating in
a corporate network, check with an IT technician that the
following requirements are met . As a general rule it is not
necessary to modify these parameters in a domestic router:
» The DHCP server in the router must be activated .
»
There must be a direct Internet connection, without
passing through a proxy .
»
The output ports must be open:
˃ 123 UDP
˃ 5000 TCP
Requirements for correct operation
Installation instructions
TEST
OFF
ON ON ON ON ON ON ON ON