Ducasa Smart Command Tevolve, Инструкция по установке и эксплуатации

Страница: 12 / 16

12
Colorado DGi+
To pair the towel rail press the OK button for 5
seconds until the icon appears in the top right of
the screen . Your Colorado DGi+ is now connected
to the
Gateway .
MODE / OK CONFIG
Wed. 11:00h
21
.5°C
Set point:
COMFORT
PAIRED WITH
GATEWAY
Installation instructions
• Not paired: LED off
• Paired correctly: the LED flashes once every two and a half
seconds .
• Paired but lost: the LED flashes once every half a second.
This happens when the Energy Monitor loses connection with the
Gateway . Once communication with the Gateway is restored, the
Energy Monitor will connect again automatically .
Status of the Energy Monitor LED
Energy Monitor
To pair the Energy Monitor press using the clip
supplied, the small push button on the top of the
Energy Monitor . Refer to the Status of the Energy
Monitor LED chart (Below) to check that it is
paired . Your Energy Monitor is now connected to
the Gateway .
Please Note : Once the Gateway’s link button is
pressed you have one minute to add a heater .
When the heater has been added, you have one
minute to add a further heater without pressing
button (3) .