Original Instructions
OPERATION
Start and stop the engine
WARNING
: the blade begins to rotate As soon as the engine is started.
NOTE
: do not operate the machine in enclosed or poorly Ventilated areas as the
exhaust gas contains toxic substance. Keep hands, feet, hair and clothing away from
All the moving parts of the machine. the exhaust and other Parts of the machine will
become hot during use.
Make sure that the blade is securely fastened before
Starting the engine.
NOTE
: to start the engine, make sure that the spark Plug boot is located on
the plug and the machine is filled with sufficient oil and petrol.
To start the engine
As shown in Fig 15-17
1. When starting a cold engine, press down the Primer fully 3-5 times.
(For lawnmower with throttle control Need to put the throttle control lever on the
START
position before starting)
WARNING
Too much presses on primer
May cause engine flooded When starting a warm
Engine, the primer does not need to be used. If
the Engine stops due to a lack of petrol, refill and
press
Down the primer3~5times.
2. Stand behind the mower. Pull the engine Start/
stop lever toward upper handle
With one hand. And place the other hand on
the starter handle.
3. Pull the starter handle out approx. 10-15cm
until you feel a resistance and then start the
Engine with a sharp pull.
14
Fig 15
Primer
Fig 16