Installation, operation and maintenance instructions - DualSun XXXM
–
60
–
3BBP
V1.2
–
March 2020
Page
11
sur
41
2.4
General recommendations
2.4.1
Handling
DualSun modules must be handled like any glass product. To avoid accidents, injuries, or damage to the module during
work, the following precautions must always be followed:
•
Do not walk on the modules.
•
Do not drop anything on the modules.
•
Protect modules from possible scratch on front and rear faces
•
Do not exert any mechanical tension on the electrical connection.
•
Always lift and transport the modules with both hands and never use the junction box as a carrying handle.
For the complete process of DualSun modules unconditioning and handling, see the DualSun file No. XX-04.
2.4.2
Transportation
In order not to damage the modules during transport, the following instructions must be followed:
•
Transport stacked modules vertically, with a separator that supports the frame level of each module.
•
Do not remove the original packaging until the time of installation.
•
Do not apply mechanical pressure to the modules (for example, do not attach the modules using a strap, or
place any objects on the surface of the modules).
2.4.3
Storage
When storing, to avoid accidents or damaging the modules, the following instructions must be followed:
•
Store the modules vertically.
•
Do not store the modules on the edges, in a corner, or on an irregular surface.
•
Do not place any objects on the surface of the modules.
•
When choosing a suitable storage location, make sure that:
o
the location is dry and cool,
o
No object can fall on the module and thus damage it.
If a DualSun module is damaged or broken, it is necessary to replace it. Never install a damaged
module.
