background image

ADDITIONAL SAFETY RULES 

• Be sure to read and understand all instructions. Failure to follow all instruc-
tions listed below may result in electric shock, fire and/or serious personal 
injury.
• Know your power tool. Read operator’s manual carefully. Learn the applica-
tions and limitations, as well as the specific potential hazards related to this 
tool. Following this rule will reduce the risk of electric shock, fire or serious 
injury.
•  Always  wear  safety  glasses  or  eye  shields  when  using  this  saw.  Everyday 
eyeglasses  have  only  impact-resistant  lenses;  they  are  NOT  safety  glasses. 
Following this rule will reduce the risk of serious personal injury.
• Always protect your lungs. Wear a facemask or dust mask if the operation 
is dusty. Following this rule will reduce the risk of serious personal injury.
• Always protect your hearing. Wear protection during extended periods of 
operation. Following this rule will reduce the risk of serious personal injury.
• Inspect the tool’s cord periodically and if damaged contact Customer Ser-
vice. ALWAYS be aware of the cord location. Following this rule will reduce 
the risk of electric shock or fire.
• Check for damaged parts. Before using the tool, inspect all parts for dam-
age to determine if it would operate properly and perform its intended func-
tion. Check for misalignment or binding of moving parts, breakage of parts 
and  any  other  condition  that  may  affect  the  tool’s  operation.  A  guard  or 
other part that is damaged should be properly repaired or replaced. Contact 
Customer Service.  Following this rule will reduce the risk of electric shock, 
fire or serious injury.

      CAUTION! 

If the blade becomes twisted or misaligned in the cut, 

the teeth at the back edge of the blade can dig into the top surface of the 
work piece causing the blade to climb out of the kerf and jump back toward 
the operator.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THIS MANUAL

SPECIFIC SAFETY RULES

           

WARNING!

To avoid serious personal injury, do not attempt to use this saw until 
you read and understand completely the user’s manual. If you don’t 
understand  the  warning  and  the  instructions  in  this  manual,  do  not 
use this product. Call customer service for assistance.

 8

Содержание M1YT-ZTH-115
























Отзывы: