DualSaw M1YT-ZTH-115, Руководство пользователя

Страница: 15 / 23

ASSEMBLY
MOUNTING THE LASER GUIDE
1. Loose light knob and slide laser
light out. (Fig. 15) 2. Open laser light and remove bat-
tery protector. (Fig. 16)
Fig. 15
Fig. 16
3. Set laser guide on the lubrication
unit of the saw. (Fig. 17) 4. Align laser guide with the lubri-
cation unit and secure by tightening
the guide knob. (Fig. 18)
Fig. 17 Fig. 18
5. Align the laser point with the seam
line on the top of the guide in order to
project a line at 90 degrees. (Fig. 19)
6. Secure laser light by tightening the
laser light knob.
NOTE: If laser point is not aligned
with the seam line on the laser
guide, the laser will project a line in
angle.
Fig. 19
Fig. 20
15