REPLACEMENT HEAD INSTALLATION
Step 1
FIXTURE INSTALLATION
The OCR-03L fixture can be wall mounted or ceiling mounted at a height of 7ft to 10ft. The
LED lamps can be adjusted to desired position. The lamp heads can be locked in desired
posisiton using the lock nut and screw.
Step 3
Step 2
NOTE:
Configuring the number of OCR remotes requires calculation of total wattage capacity
based on the capacity of the fixture powering the remotes.
Install DC wiring (12-18AWG depending
on wire length) from J-box for wall or
ceiling mount.
Install the mounting plate to the
J-box using the provided gasket
and appropriate J-box screws
(J-box screws not provided).
NOTES
12-18AWG
DC wiring (+)
12-18AWG
DC wiring (-)
Connect ground
(copper) conductor
OCR-03L wattage for calculation:
OCRSB-03L = 3W
OCRSW-03L = 3W
OCRSZ-03L = 3W
OCRDB-03L = 6W
OCRDW-03L = 6W
OCRDZ-03L = 6W
•
•
•
•
•
•
Connect the ground wire
from the building to the
back plate with the screw
provided.
Step 1
Remove the cotter pin
from the old lamp head.
Step 2
Cut the wires of the old
lapm head.
Unscrew the old lamp head
from the base plate.
Step 3
Remove the cotter pin from the new lamp head.
Screw in the new lamp head.
Step 4
Connect the red and black wires.
Insert the cotter pin back in the screw head.
