12
13
PROGRAMMABLE DOSING MEMORY
The Capsule Machine has an Auto-Dose feature that ensures the correct amount of drink
is dispensed every time. Ensure the machine has enough water in the Water Tank and is
switched on.
1
PLACE CUP
2x
2
DOSING ESPRESSO
4
5
COMPLETE
Open the Lever fully and
insert a capsule. Then push
the Lever down fully. Place
a cup on the Drip Tray.
Press the Coffee Button
twice
and
hold for 5 seconds
,
then release. The machine
will start dispensing. Press the
Coffee Button again when the
desired amount is reached, and
the dispensing will stop.
Press the Coffee Button
once
and
hold for 5 seconds
,
then release. The machine
will start dispensing. Press the
Coffee Button again when the
desired amount is reached,
and the dispensing will stop.
3
DOSING LUNGO
The Dosing Memory has now
been programmed to dispense
your chosen quantity of coffee
or tea. NOTE: program will
be saved even if machine is
unplugged.
DOSING TEA
NOTE
- The factory
setting of the machine is
programmed to 35ml for
the Espresso button, 70ml
for the Lungo button and
180ml for the Tea button.
However, this can be
adjusted to suit your taste
preference.
For tea,
we recommend
using 1 capsule for a 150-
180ml tea cup (depending
on your strength and taste
preference). For a mug
(250ml) we recommend
using 2 capsules and setting
your dose to 125ml.
AUTO-START
The Auto-Start feature allows you to pre-select your dose whilst the
machine is warming up. Then, once the machine has warmed up it will
automatically dispense the selected Coffee or Tea.
3
PRE-SELECT
BUTTON
4
DISPENSE
Whilst the machine is
warming up, press the
Coffee Button
once
for
Espresso,
twice
for Lungo
or press the Tea Button
once
for tea. The selected
Button will flash and the
other Buttons will cease to
illuminate. Tip: press
Buttons firmly.
The machine will now
auto dispense the selected
beverage, once it has
warmed up.
U
N
PL
U
G W
HEN NO
T
IN
U
SE
SW
ITCH OFF &
Press the Tea Button
once
and
hold for 5 seconds
,
then release. The machine
will start dispensing. Press Tea
Button again when the desired
amount is reached and the
dispensing will stop.
5
FLUSH
PLACE CUP
Place a small cup on the Drip
Tray. If you like a particularly
hot coffee, we recommend
pre-warming the cup first
(see page 10 ‘Daily Use’).
LIFT LEVER
Lift the Lever fully and insert
the capsule. Then close the
Lever fully. The Coffee &
Tea Button will be flashing
to indicate that the machine
is warming up when the
machine is turned on.
1
2
After using the machine we recommend flushing the machine
through. Remove capsule and ensure the Lever is pushed
down fully, then press the Coffee Button. Water will flush
through the machine and into the Drip Tray. Empty the Drip
Tray,
switch off and unplug after use.
