22
23
Use the Steam Pin to
remove dried milk from
inside the Steam Wand.
Use the Measuring Spoon
to place the Nut back on
the Steam Wand. Screw
clockwise until tight.
7
CLEAN THE
STEAM WAND
9
If the Steam Wand is
completely blocked, it is
possible to remove the Wand
assembly for cleaning. Visit our
service section on
www.dualit.com/support for
replacement advice or to
purchase spare parts.
8
IMPORTANT NOTICE:
Turn on your machine.
Flush the Steam Wand
by dispensing water or
steam to remove any
milk residue from inside
the Steam Wand. Risk of
scalding.
FLUSH THE
STEAM WAND
REPLACEMENT
STEAM WAND
10
Remember to use Filter Papers.
These can help to prevent
Filter blockages. These are
available directly from
www.dualit.com/filterpapers.
FILTER PAPER
MAINTENANCE
Kilrock Espresso & Coffee Machine Descaler
A build-up of limescale can cause your coffee machine
to stop working. Dualit recommends descaling at least
once a month and more regularly in hard water areas,
to prevent limescale build up in your coffee machine.
The descale cycle will take approximately 45 minutes to
complete. Each box includes two descale treatments.
OSCAR Water Softening Bags
A build-up of limescale is one of the most common
causes of coffee machine break downs. OSCAR Water
Softening Bags (OSCAR Bags) are placed in your coffee
machine’s water tank and work to soften the water,
reducing limescale build-up. The OSCAR Bags are
suitable for all Dualit Pump Espresso Coffee Machines
with Water Tanks.
For more information, visit our website
www.dualit.com/machine-care.
DESCALER
WA
TER
OR
1
Ensure your descaling
product is suitable for
coffee machines;
follow
descaling product
instructions carefully.
If you are using a water
softener, ensure water
softener is removed before
adding descaler. Fill Water
Tank with the descaling
solution.
2
3
Place a container with
a capacity of more than
1 litre on the Drip Tray
underneath the Holder.
Caution: Do not
remove the Drip Tray.
Remove Froth Nozzle from
the Steam Wand. Direct
Steam Wand into container.
DESCALE REGULARLY
HARD WATER WILL CAUSE LIMESCALE BUILD-UP,
RESULTING IN BLOCKAGES THAT CAUSE PERMANENT
DAMAGE. IMPORTANT NOTICE: PRODUCT FAILURE
DUE TO THE BUILD UP OF LIMESCALE IS NOT COVERED BY GUARANTEE.
Dualit recommends descaling regularly, in a well-ventilated area to prevent limescale build up
in the machine. See limescale warning on page 6-7 for frequency in your area in accordance
with the hardness of your water. It is essential that a compatible descaler is used - visit
www.dualit.com for descaler options. The descale process takes approximately 30 minutes.
CAUTION: AVOID CONTACT WITH DESCALING SOLUTION.
STEAM RELEASED DURING DESCALE PROCESS MAY BE HARMFUL.
RISK OF SCALDING AND INJURY.
FILTER HOLDER &
NX
®
HOLDER
CONTAINER
THE DESCALER
U
N
PL
U
G
WH
EN NO
T IN
U
SE
Place the Holder most
frequently used into the
machine, ensuring it is
empty. If both Holders and
Filters are used frequently,
cycle between them.
Do
not soak the holders in
descale solution.
Ensure
they are rinsed thoroughly
after descaling.
