5
MXD136BT
OPERATION
General Operation
Press
or any other button
to turn the unit on. Press
again to turn the unit off.
Press
MODE
to select between AM/FM, USB, Bluetooth
or auxiliary input modes. Modes of operation are
indicated in the display. USB mode will not appear
unless a USB device is connected.
The radio frequency (tuner mode) or MP3 title/track
information (USB mode) will be shown by default. Press
DISP
to display the clock. The default display will return
after five seconds.
When in USB mode, the display will alternate between
track number/elapsed time and available MP3
information, including file name, song title, artist name,
album name and folder name.
Press
RESET
upon initial installation or if abnormal
operation occurs. Reset button is located in the top right
corner.
Press
DISP
to display the clock, then press and hold
DISP
until the hours will flash. Rotate the
volume knob
to adjust the hours. Press the
volume knob
, and the
minutes will flash. Rotate the
volume
knob
to adjust the
minutes.
Insert a 3.5mm connector in the front panel AUX port.
Connect the other end of the 3.5mm connector to the
headphone output of an audio device, MP3 player, etc.
Adjust volume using the
volume knob
(00-40).
Press
EQ
to select between the following preset
equalization curves: Pop, Jazz, Classic, Beat, Rock and
Off.
Note:
Ability to manually adjust Bass and Treble settings
is disabled when a preset equalization curve is selected.
Setting equalization curves to OFF enables manual Bass
and Treble adjustments.
Power On/Off
Mode
Display
Reset
Set the Clock
Auxiliary Input
Volume
Preset EQ Curves
