6
AM505BT
Press
OPEN
to open the face plate, then pull away from
the right side to remove. To re-install, insert right side of
faceplate first then push left side to secure.
Press or any other button to turn the unit on. Press to
turn the unit off.
Press
SOURCE
to enter the Source Menu, then press
SOURCE
or rotate the
volume knob
to select between Tuner,
Auxiliary Input, USB, iPod, Bluetooth and Pandora modes.
Modes of operation are shown in the display.
The AM505BT uses the IP35USB adapter on the back of the
unit for connecting an audio device, MP3 player, etc. Refer
to the wiring diagram for connection instructions. Once
connected, press
SOURCE
to select auxiliary input mode.
Adjust volume using volume knob (00-46).
Press
DISP
to toggle between ID3 tag and file/folder name
for MP3/WMA files being played from USB devices.
Press
RESET
upon initial installation or if abnormal
operation occurs. Reset button is located behind the front
panel.
The unit will display the time on the LCD display. Clock
settings are adjusted in the General setup menu.
The clock will display 12-hour AM/PM time or 24-hour time
(22:00). Frequency spacing is adjusted in the General setup
menu (refer to page 8).
Press to manually activate camera mode (camera wire will
supply power while this mode is on). Press and hold for
three seconds to activate Loudness settings (Low, High, Off).
Faceplate Removal
Power On/Off
Source
Auxiliary Input
Volume
Display
Reset
Set the Clock
12/24-hour Clock
Camera / Loudness
General Operation
