17
AM505BT
Press and hold
for 3 seconds to disconnect a connected
device. The device will remain paired and appear in the
SEARCH menu, but not be connected.
Press
once. “Enter Phone Number” appear on the
display. Using the remote control, enter the phone number
using the 0-9 buttons. Press
or
SELECT
on the remote
control or front panel to begin dialing.
Note
: Placing a phone call from your cell phone will also
initiate Bluetooth function.
Press
SELECT
from Bluetooth mode to view recent calls
dialed, received or missed while connected to the head
unit. Turn the volume knob to cycle through the recent
phone numbers. Press
SELECT
or
to dial the number.
To redial the last phone number, press
two times from
Bluetooth mode. Press
or
SELECT
again to redial the
phone number.
Incoming phone calls will automatically appear on the
display and a ring tone will be heard.
Note
: The volume of the ring tone depends on the volume
level of the head unit and may not be heard if the volume is
set to a low level or mute is activated.
• Press
to receive the incoming phone call.
• Press and hold
to refuse the incoming phone call.
Note
: If Auto Answer is set to ON in the setup menu, all
phone calls will be received automatically.
During an active phone call, press
to end a phone call.
If the phone call was received when listening to music
in another mode, the head unit will resume the previous
mode.
The head unit supports A2DP wireless streaming audio
from a Bluetooth mobile device directly to your head unit.
The following functions can be used to control the music:
• Press
ll
to skip to the next available audio track.
• Press
nn
to skip to the previous audio track.
• Press
l
/ II
to toggle between play and pause during
playback.
Disconnecting a
Device
Manual Dialing
Recent Calls List
Redialing the last number
Receiving a Phone Call
Ending a Phone Call
Streaming Audio
Bluetooth Operation
