12. Maintenance Information
Maintenance and servicing of the machine must only be undertaken by
suitably trained and qualified technicians.
Unloader Valves and Safety Valves must only be adjusted and serviced by
suitably trained and qualified technicians.
Ensure all steps from the Decommissioning & Storage section have been
carried out before starting any work on the machine.
• ENGINE
- Refer to engine manufacturer’s handbook for specific engine
maintenance and service schedules.
!
!
!
14
10. Transporting
During transportation the machine must be secured using suitably rated straps
and fixings. Ensure the fuel is turned off at the fuel tap.
The machine must only be lifted and secured by attaching lifting/security
equipment to the main frame. No lifting/security straps should come in to contact
with the engine, gearbox, pump, valves or filter.
!
!
11. Decommisioning and Storage
• ENGINE
- Follow the guidelines in the relevant section of engine manufacturer’s
handbook.
• HOSES AND ACCESSORIES
- Disconnect hoses and lance assembly. Ensure all
water is expelled from hoses and lance, check for damage and store in a manner
that will not kink the hose assemblies.
• PRESSURE WASHER
- Ensure all the water is expelled from the pump by turning
over the engine.
• BATTERY
- Disconnect battery and ensure the battery pole terminals and pole
terminals are adequately protected with pole grease.
• STORAGE
- Machine and accessories must be stored in dry and frost-free
environment.
