DTS XR2000 BEAM, Руководство пользователя

Страница: 13 / 40

11.1-DMX Addresses
XR2000 BEAM can be controlled with 21 (default) or 16 DMX channels.
If you want to use the unit in 21 channels, set the following addresses on the mixer:
Projector 1 A001
Projector 2 A022 If you want to select the next projector, just add “21”
11.2-Selecting the DMX address
1) Press the UP-DOWN key until you reach the required DMX channel. The numbers on the display will
start to flash (but the new DMX address hasn't yet been set).
2) Press ENTER to confirm your selection. The numbers on the display will stop flashing and the
projector is now setted to the new DMX address.
TRICKS:
if you keep pushed the UP or DOWN keys, the channels are calculated more quickly and you get a
faster selection.
XR2000 BEAM
Projector 3 A043
….. A….
projector 6 A106
12 FIRMWARE UPDATING
Warning:
This procedure require a base knolewge of computer applications and Windows
Hyperterminal program.
To update the software version of the you need:
D.T.S. RED BOX interface (D.T.S. Code: 03.LA.008).
USB-DMX Drivers for the D.T.S. RED BOX interface .
(The drivers and the installation procedure are available in our web site www.dts-lighting.it)
‘Updating the software version’
Please follow the procedure below to perform the update:
1. Install the D.T.S. RED BOX USB-DMX driver on the PC you will use to update the unit software.
2. Connect the D.T.S. RED BOX interface to the PC by using a USB cable.
3. Connect the D.T.S. RED BOX interface to the fixture by using a DMX cable.
4. Download the new software version into the unit by using Windows Hyperterminal program.
It will be possible to download the software from the reserved area of D.T.S. web site:
www.dts-lighting.it.
Please refer to an authorised DTS service centre.
ARC 1200
13
!
XR2000 BEAM