DTS TDAS WET, Руководство пользователя, Страница: 4 / 15

TDAS WET User’s Manual April 2012
support@dtsweb.com
4
Rev. 4
Introducing the TDAS WET
The TDAS WET is a crash-hardened, multifunction networking device that allows you to
communicate wirelessly with TDAS equipment mounted on a dynamic testing device or
other remote location. Power, communication signals and status information are easily
accessible via the connector and LED panels. The TDAS WET will integrate seamlessly
into any existing on-site network system using 2.4 GHz, 802.11b, g and/or n
communication protocols.
This manual discusses the features available with the TDAS WET. To identify the
specific hardware included with your system, please see your packing list.
Overview of TDAS WET Features
 Built and tested for 100 g dynamic testing environments.
 Supports IEEE 802.11b/g/n communication protocols.
 Three external antennas to support high-speed performance and extended
coverage.
 Power input is protected against reverse polarity and transient over-voltage
conditions.
 Recessed push-button switch prevents inadvertent power down.
 LED status indicators for power, communications and WLAN.
 Integral mounting holes for ease of use.
Connector Panel
The connector panel allows you to connect external power and interconnect
communication signals between TDAS equipment. Please see Appendix A for the
connector specifics and pin assignments.
TDAS WET Connector Panel
12V POWER Connector
The unit has a dedicated connector for primary input power (12 V nominal at 1 A; 11-
15 V range). The TDAS WET does not contain a battery or back-up power source.