
18
12.2-Ethernet to DMX operation
(not yet implemented)
For Ethernet to DMX operation connect the mixer Art-Net / sACN signal via Ethernet
switch to the etherCON RJ45 input connector of the first unit only
(sACN not yet
implemented)
.
In this configuration the first unit works as an Ethernet to DMX converter and sends
DMX signal to its DMX output connector.
All the other units must be connected as a DMX chain with standard DMX settings.
Only for the first unit scroll till NETWORK menu (refer to DISPLAY FUNCTIONS for
details):
Select under INPUT menu
“Art-Net” or “sACN” as input control signal.
Select under IP ADDRESS MODE menu “Default”, “Static” or “DHCP” mode.
Select ETH TO DMX menu to ON.
Set the IP address and Net Mask.
IP address must be different for each unit
on a network.
Set the Art-Net or sACN Universe.
DMX address: 1
DMX address: 45 DMX address: 89
IP address: 002.214.192.007
Universe: 1
DMX address: 1
DMX address: 45 DMX address: 89
IP address: 002.214.192.008
Universe: 2
For Installations where long distance DMX cable connections are needed, we suggest
to use a DMX terminator.
The DMX terminator is a male XLR 3-5 pins connector with a 120 ohm resistor
between pin 2 and 3.
The DMX terminator must be plugged into the last unit (DMX out panel connector) of
the DMX line.
PLACE A 120 OHM RESISTOR BETWEEN PIN 2
AND 3 OF A MALE XRL CONNECTOR AND PLUG IT
INTO THE DMX OUT PANEL CONNECTOR OF THE
LAST UNIT CONNECTED TO THE DMX LINE
1
2
3
5
4
OUT
120 ohm
PIN 3
PIN 2
Содержание Synergy 5 Spot
