12
MENU
Up-Down
Up-Down
ENTER
Up-Down
ENTER
ENTER
ENTER
ENTER
WIRELESS DMX
Wireless DMX enabled / disabled.
By activating WDMX MODE, it will be
possible to control PROFILO COMPACT
LED 50 via D.T.S. ANTENNA Wireless
DMX Transmitter (cod. 03.E1271).
Active only on PROFILO COMPACT
LED 50 with Wireless on board
Wireless
Enabled
Wireless
Disabled
UNLINK = LOG OUT
Logging on PROFILO COMPACT LED 50 (WIRELESS DMX must be enabled on PROFILO COMPACT
LED 50 unit)
To log on the PROFILO COMPACT LED 50 in the WIRELESS system simply press and quickly release the
function button on the transmitter.
The transmitter will start flashing rapidly red/green scanning for new free receivers / PROFILO COMPACT
LED 50 units. When a PROFILO COMPACT LED 50 logs on to the transmitter the LINK green light on
transmitter starts to flash rapidly.
After approximately 10 seconds the transmitter will jump back to normal mode and continue transmitting data.
The PROFILO COMPACT LED 50 now try to synchronize to the transmitter.
When synchronized to the transmitter, 2 different modes are possible:
1. Antenna transmitter has detected and transmits a DMX signal, in this mode a solid green light is seen on the
transmitter and solid display is seen on PROFILO COMPACT LED 50.
2. No DMX signal connected, the Antenna transmitter will flash red/green; display blinking on PROFILO
COMPACT LED 50.
To log PROFILO COMPACT LED 50 off from a transmitter simply select UNLINK function
under WIRELESS DMX MENU
and press ENTER.
When PROFILO COMPACT LED 50 is logged off, the display is blinking, meaning its available for log in on a
new transmitter.
Logging out a PROFILO COMPACT LED 50
Select UNLINK function
under WIRELESS DMX MENU
and press ENTER.
When PROFILO COMPACT LED 50 is logged off the display is blinking, meaning its available for log in on a
new transmitter.
Logging out all PROFILO COMPACT LED 50 units linked to a transmitter
Press and hold the function button of the transmitter for about 3 seconds
.
When the display is blinking on
PROFILO COMPACT LED 50, it mean that the units are logged out.
Transmitter, Status LED
Flashing red/green, no dmx connected.
Solid green, dmx signal detected and transmitted.
Fast flashing red/green, log in mode (every free PROFILO COMPACT LED 50 unit, not logged in to any other
transmitter, will be logged on)
PROFILO COMPACT LED 50 Status
Display blinking = not logged on to a transmitter (free).
Solid display = logged on to a transmitter and receiving dmx data.
NOT IMPLEMENTED ON PROFILO COMPACT LED 50
