2
Main features
•
Two station GSM Intercom with simple single button calling.
•
Auto 60 second call hang-up with 10 second beep warning.
•
DTFM gate opening by call recipient (Press 9 on phone keypad).
•
Missed call Access control of up to 500 registered users.
•
Gate alarm SMS to programmed recipients.
•
Optional 7 day activity log reporting.
•
Compatible with most GSM networks (Quad band).
•
Operates from an 8 to 32VDC supply (Battery backup recommended).
•
Vandal resistant & weather proof stainless steel housing (IP53).
Technical Specifications
Quad-band
850/900/1800/1900MHz
GPRS Multi-slot Class
12’1~12 configurable
GPRS Mobile station
Class B
Compliant to GSM
Class 4
Phase 2/2+
(2W @ 850/900MHz)
Class1
(1W @ 1800/1900MHz)
Speaker
8ohm, 60mm Dia., (Waterproof Cone)
Audio
870mW RMS (1% Distortion)
Microphone
10mm Dia., Electret (Echo cancellation)
Supply voltage range
8.0 t0 32VDC (12/24V nominal)
Operation temperature
-10ºC to +60ºC
Dimensions
115Width x 180Height x 100mmDepth
Mounting
Wall or Gooseneck pole
Operation
1.
Momently press button 1 or 2 to call the labelled name/number. The call will be limited to 60
seconds with a 10 second warning beep prior to the call ending. The call recipient can
communicate with the caller using any handset and can open the gate during the call by pressing
the phones number 9 key.
2.
The call recipient number is programmed as recipient 1 for button 1 and recipient 2 for button 2.
Recipient programming is accomplished by using the free “My Gcom” internet portal or by SMS
commands (See the Gcom520 programming sheet on page 3).
3.
Permanent or temporary gate access control for up to 500 users can be setup using the free “My
Gcom” internet portal or by SMS commands (See the Gcom520 programming information
below)
4.
User configurable location and alarm messages together with status and activity logging modes
are setup using the internet portal.