8- VOLTAGE AND FREQUENCY
The DELTA 8 R can operate at 90-260 VOLT 50 or 60 Hz.
9- INSTALLATION
DELTA 8 R may be either floor or ceiling mounted.
For floor mounting installations, the DELTA 8 R is supplied with four rubber mounting feet on the base.
For ceiling mounted installations, we reccomend the use of appropriate clamps to fix the unit to the
mounting surface.
The supporting structure from which the unit is hung should be capable of bearing the weight of the
unit, as should any clamps used to hung it. The structure should also be sufficiently rigid so as not to
move or shake if moving head units are attached to it.
Two 1/4 turn Fast Locks connections placed in the base of the units allow to hang the DELTA 8 R by
using the Fast Lock ‘C’ clamps provided in the box.
.
9.1- Safety cable
We recommend the use of a safety chain/cord connected to the DELTA 8 R and to the suspension truss
in order to avoid the fixture accidentally falling should the main fixing point fail. Make sure that the iron
cable or chain can bear the weight of the entire unit.
You may attach the safety chain/cord to the attachment points (A) located on the base of the fixture, as
shown in the picture below.
9.2- Protection against liquids
The projector contains electric and electronic components which should under no circumstances come
into contact with oil, water or any other liquid. The proper unit functioning would be compromised
should this occur.
!
!
SAFETY CHAIN/CORD
DELTA 8 R
9
LOCK
SAFETY CHAIN/CORD
ATTACHMENT POINT
A
