Mode Master
The Delta setted as MASTER, send
DMX signal to all the other units
connected to the same DMX line
ENTER
Master Mode
Set CHASE CPR1
Set TIME Sec 0025
Set WAIT Sec 0015
Up-Down
Up-Down
ENTER
MASTER MODE SETTING
This menu allow to set Delta R as
master unit (No DMX signal must
be present on unit’s DMX input
panel) .
The unit will ran in automatic mode
without needing of an external
controller.
Different chases are selectable by
user
ENTER
Set MASTER MODE
Mode : MASTER
Actual : DMX
ENTER to CONFIRM
Up-Down
16
DELTA R
CRNB
Rainbow colours effect.
Time and Pan&Tilt selectable by
user
CUE 1-9
Color Macros with fixed colors
Pan&Tilt selectable by user
CPR1/CPR2/CPR1&2
Chases with 16 steps previously
created in RECORDER mode.
Time and Wait time selectable by
user
By setting all the units connected to
the MASTER, to DMX address 1,
them will be sinchronized with the
Master unit following the chase
selected on it, including TIME, WAIT
and Pan&Tilt position of the MASTER
unit.
By setting all the units connected to
the MASTER, as SLAVE unit (see
SLAVE mode), them will be
sinchronized with the Master unit
only for TIME and WAIT time, but
running their own chase CPR1/CPR2
with dedidicated Pan&Tilt position,
colors and effects.
Mode Slave
ENTER
The SLAVE unit receive DMX signal
from the MASTER unit
Up-Down
Up-Down
ENTER
SLAVE MODE SETTING
This menu allow to set the Delta R
as slave unit.
DMX signal must be present from
MASTER unit in order to ran in
SLAVE mode.
Set SLAVE MODE
Mode : SLAVE
Actual : DMX
ENTER to CONFIRM
By setting all the units connected to
the MASTER, as SLAVE unit, them
will be sinchronized with the Master
unit only for TIME and WAIT time,
but running their own chase
CPR1/CPR2 with dedidicated
Pan&Tilt position, colors and effects.
