DTS DELTA 10 F, Руководство пользователя, Страница: 15 / 28

15
DELTA 10 F
Up-Down ENTER
ENTER
MENU Up-Down
ENTER
SLAVE MODE
Slave mode for ChPr program.
All slave units will be
synchronised with master unit,
running their own Chpr program.
Up-Down ENTER
MENU
Up-Down
ENTER
INFRARED MODE
Infrared remote control.
By activating Ir MODE, it will be
possible to navigate trought the
unit functions by using the D.T.S.
infrared remote control.
D.T.S. Code :0514L008
(Not implemented on DELTA 10 F) NOTE:
External infrared remote sensor
needed.
D.T.S. Code :03.LA.016
Up-Down ENTER
MENU
Up-Down
WIRELESS DMX
Wieless DMX enabled / disabled.
By activating WDMX MODE, it will
be possible to control Delta 10 F
via D.T.S. ANTENNA Wireless DMX
Transmitter (cod. 03.E1271).
WIRELESS DMX system on
Delta 10 F is available on
request.
NOTE:
needed (cod. 03.LA.012).
External IP65 2dbi
omnidirectional Antenna
needed (cod. 0508A040)
Wireless DMX receiver card
Up-Down ENTER
ENTER
ENTER
Logging on Delta 10 F (WIRELESS DMX must be enabled on Delta 10 F unit)
To log on the Delta 10 F in the WIRELESS system simply press and quickly release the function button on the transmitter .
The transmitter will start flashing rapidly red/green scanning for new free receivers / Delta 10 F units. When a Delta 10 F logs on
to the transmitter the LINK green light on transmitter starts to flash rapidly.
After approximately 10 seconds the transmitter will jump back to normal mode and continue transmitting data. The Delta 10 F now
try to synchronize to the transmitter.
When synchronized to the transmitter, 2 different modes are possible:
1. Antenna transmitter has detected and transmits a DMX signal, in this mode a solid green light is seen on the transmitter and
solid display is seen on Delta 10 F.
2. No DMX signal connected, the Antenna transmitter will flash red/green; display blinking on Delta 10 F.
To log Delta 10 F off from a transmitter simply select UNLINK function under WIRELESS DMX MENU
and press ENTER.
When Delta 10 F is logged off the display is blinking, meaning its available for log in on a new transmitter.
Logging out a Delta 10 F
Select UNLINK function under WIRELESS DMX MENU and press ENTER.
When Delta 10 F is logged off the display is blinking, meaning its available for log in on a new transmitter.
Logging out all Delta 10 F linked to a transmitter
Press and hold the function button of the transmitter for about 3 seconds. When the display is blinking on Delta 10 F, it mean that
the units are logged out.
Transmitter, Status LED
Flashing red/green, no dmx connected.
Solid green, dmx signal detected and transmitted.
Fast flashing red/green, log in mode (every free Delta 10 F unit, not logged in to any other transmitter, will be logged on)
Delta 10 F, Status
Display blinking, not logged on to a transmitter (free).
Solid display, logged on to a transmitter and receiving dmx data.
UNLINK = LOG OUT
WIRELESS DMX SYSTEM
ENABLED
WIRELESS DMX SYSTEM
DISABLED
ENTER Up-Down ENTER ENTER