DTS DELTA 10 F, Руководство пользователя, Страница: 12 / 28

12- DISPLAY FUNCTIONS
DELTA 10 F
DOWN
UP
ENTER MENU
12
DISPLAY FUNCTIONS
The DELTA 10 F display panel shows all the available functions . Using these functions, it is
possible to change some of the parameters and add some functions. Changing the D.T.S. setting
can vary the functions of the unit so that it does not respond to the DMX 512 signal used to
control it. Carefully follow the instructions below before carrying out any variations or selections.
NOTE: the symbol shows which key has to be pushed to obtain the desired function.
Software version 2.17
Up-Down MENU ENTER
DMX MODE
To select DMX mode : 10 ch (default) - 6
ch - AUX - CUSTOM and MACRO settings
6 CHANNELS
Up-Down
Up-Down
ENTER
ENTER
Up-Down MENU ENTER Up-Down
REVERSE DISPLAY
Reverses display's reading depending on
the mounting position
(On the ground or suspended).
Up-Down
Floor
position
Suspension
position
Up-Down ENTER
Up-Down ENTER
DISPLAY STAND BY
To turn off the display (after 5 seconds)
Or leave it always on.
Display OFF
Display
always ON
ENTER
ENTER
ENTER
ENTER
Default DMX Mode = 10 CH
10 CHANNELS
Up-Down
ENTER
AUX MODE
Not implemented on
DELTA 10 F
Up-Down
Up-Down ENTER
ENTER
ENTER
ENTER
Custom mode enabled
Show Custom settings
Setting the parameters
on Custom Mode
CUSTOM DMX mode let you set the
parameters for Shutter, Dimmer, Red,
Green, Blue, Amber, White, Ctc, Macro
and Function to the desired DMX
channels.
AUX mode let you activate an external
ON -OFF control on IR connector.
(Not implemented on DELTA 10 F)
MACRO
MACRO Function, enable channel
mapping macro rainbow effects
STD (default)
Up-Down ENTER ENTER
ENTER
Standard mode enabled
(Default)
Show Custom settings