DTS 03.TS046.46.A, Руководство пользователя

Страница: 14 / 20

14
10- RDM FUNCTIONS
By using a RDM controller it is possible to set DMX address, DMX mode and other
parameters.
SCENA LED 200 accepts the following RDM commands:
DEVICE_INFO
To read the following parameters:
•
RDM protocol version
•
Fixture model ID
•
Fixture type
•
Software version ID
•
DMX channels
•
DMX mode
•
DMX address
•
Total sub-fixtures
•
Total sensors
IDENTIFY_DEVICE LED ON at max power to identify the fixture
DMX_START_ADDRESS
To read / set the DMX address
SOFTWARE_VERSION_LABEL Software version ID
SUPPORTED_PARAMETERS List of all supported parameters
PARAMETER_DESCRIPTION
Description / details of Manufacturer Specific
p
arameter as “NO DMX ACTION”
DMX_PERSONALITY To set the DMX mode
DMX_PERSONALITY_DESCRIPTION Description / details of the DMX mode
DEVICE_MODEL_DESCRIPTION Description / details of the Fixture model
MANUFACTURER_LABEL Producer ID
SENSOR_DEFINITION, SENSOR VALUE Description / values of sensors
SENSORS
1: Led Temperature
LED temperature
2: Micro Temperature Micro controller temperature
3: Driver 1 Temperature Output 1 of LED Driver board temperature
4: Driver 2 Temperature Output 4 of LED Driver board temperature
RDM MANUFACTURER-SPECIFIC PIDs
NO DMX ACTION
To set the desi
red fixture’s behavior in case DMX
signal is missing or not available.
1 = Black-out
2 = LED ON @ 60%
3 = LED ON @ 100%
4 = CUSTOM (Dimmer level selectable)
NO DMX LEVEL
0 ÷ 255 (Default = 0)
5 = Keep last valid DMX signal (Default)