Installation
ANTENNA TRANSMITTER:
1)Attach the stadard antenna to the rear panel.
2)Link the DMX source to the DMX input socket on the front panel.
3)Connect power to the unit either via the AC power input (90 to 250 VAC), the DC power input
(12 VDC) or via the DMX bypass Rj45 socket (12 VDC).
To add receivers
Note: You can add receivers at any time, even during operation.
1)Power on the receiver units and ensure that they are not linked with any other transmitter (leds
should be solid red)
2)On the transmitter unit, press and release the FUNCTION button.
The transmitter will scan for all unlinked receives for a period of 10 seconds (red led will flash
rapidly).
3)If succesfull, the receiver’s leds will goes solid green.
To unlink all receivers
1)On the transmitter, press and hold the FUNCTION button untill the red led will flash rapidly.
All registered receiver will be unlinked.
Reserved
DMX in (RJ 45)
1 : DMX -
2 : DMX +
3 : N.C.
4 : N.C.
5 : N.C.
6 : N.C.
7 : Signal Ground
8 : N.C.
DMX bypass,
DC power in (Rj45)
1 : DMX -
2 : DMX +
3 : N.C.
4 : +12 VDC
5 : +12 VDC
6 : N.C.
7 : Signal Ground
8 : DC Ground
AC Power input
(90-250 VAC)
DC Power in (12 VDC)
DMX BYPASS (XLR female 5 pins)
DMX IN (XLR male 5 pins)
Содержание 03.E1271
Страница 7: ...Notes...