DTS 03.E1271 Скачать руководство пользователя страница 3

Operating instructions

Logging on a receiver

To log on the Antenna receivers in the system simply press and quickly release the function button 
on the transmitter.
The transmitter will start flashing rapidly red/green scanning for new free receivers. When a 
receiver logs on to the transmitter the LINK green light  starts to flash rapidly in the same way as 
the transmitter.
After approximately 10 seconds the transmitter will jump back to normal mode and continue 
transmitting data. The receivers now try to synchronize to the transmitter.
When synchronized to the transmitter, 2 different modes are possible:
1. Antenna transmitter has detected and transmits a DMX signal, in this mode a solid green light is 
seen on the transmitter and LINK and DATA  green lights are seen on the  receiver.
2. No DMX signal connected, the Antenna transmitter will flash red/green; LINK green light on the 
receiver is on and DATA green light is off.
To log a receiver off from a transmitter simply press the function button on it for approximately 5 
seconds; when logged off the LINK green light will be off, meaning its available for log in on a new 
transmitter.

Antenna Transmitter

Antenna receiver

Function button

Logging out a receiver

Press and hold the function button of the receiver for about 3 seconds. When the receivers status 
LED are solid red the receiver are logged out.

Logging out all receivers from a transmitter 

Press and hold the function button of the transmitter for about 3 seconds. When the receivers 
status LED are solid red the receiver are logged out.

Transmitter, Status LED

Flashing red/green, no dmx connected.
Solid green, dmx signal detected and transmitted.
Fast fl ashing red/green, log in mode (every free receiver, not logged in to any other transmitter, 
will be logged on)

Receiver, Status LED

Solid red, not logged on to a transmitter (free).
Flashing green ~1 seconds / red ~0,1 seconds, logged on to a transmitter and dmx line idle.
Solid green, logged on to a transmitter and receiving dmx data.
Fast flashing red/green, log in mode (getting log in configuration data from a transmitter)

Содержание 03.E1271









Отзывы: