DTRONICS
DT-MTC
MANUAL
1
Setup
Intended use
With the DT-MTC, you can convert a midi signal from almost any DAW to a
relay circuit.
A commonly used application is e.g. switching on a recording light as soon
as your DAW goes into recording.
In addition, the DT-MTC has a practical counter on board that can track
Midi Time Code (MTC). Connecting is very easy; with USB to the computer,
the DT-MTC automatically presents itself as two MIDI ports and behaves
like HUI.
We have tested the DT-MTC with Reaper , Avid Pro Tools and Presonus
Studio One, but in principle the DT-MTC should work with any DAW that
supports the HUI protocol and can send MTC.
What is included
Please ensure that your DT-RTX includes the following:
•
DT-MTC Programmer
•
USB Cable
