V. Programming
Rival 432 receiver programming has influence on working mode. Before programming fimilarize with fig.1 which
shows receivers board, localization of programming buttons, relay outputs C1 and C2, LED diodes. Lightining LED diodes
shows chosen channel and working mode. Next to LED diodes are short descriptions of signalized function. Receiver's
outputs are controled by remote control's programmed buttons
2
Fig. 1
Receiver board scheme
2. Exemplary electric scheme
Fig. 2
Exemplary electric scheme of Rival 432 receiver, gate controller and electrolock electric connection.
3
4
5
1
2
6
7
8
39 mm
102 mm
Turn on
signalling
Working mode
signallin
during
programming
momentary
monostable
bistable
Power
signalling
channel 1
channel 2
Programming
buttons:
shield
antenna
s
u
p
p
ly
1
2
V
...2
4
V
A
C
/DC
channel 1
channel 2
o
u
tp
u
t
1
o
u
tp
u
t
2
electrolock
24V
gate controller
manual control output
STEP BY STEP
supply
24V AC/DC
Rival 432 receiver
Legend:
1. weakening for wires in bottom part of enclosure (inside
instalation),
2. weakenings for receiver mounting,
3. clip to hold wire,
4. chamber for electric plate,
5. wire clip clousure,
6. distance sleeve for plate mounting
układu elektronicznego (screw 2,2 x 6,5),
8. case closing openings,
7. weakening for wires in top part of enclosure (surface
instalation),
