Chapter 4
34
Video Off After: As the system moves from lesser to greater power-saving modes. Select the
mode in which you want the monitor to blank. The available options are “Suspend” and “NA”.
MODEM Use IRQ: Available options are 3,4,5,7,9,10,11 and NA. It is used to choose the
interrupt line that the Modem is used. “NA” means not available.
Suspend Mode: To set the time period waiting for Suspend Mode when the Power Management
function is set to “User Define”.
HDD Power Down: To select the time period will turn the HDD off. Accessing the HDD again
will take a few seconds for HDD to spin up for operation.
PCI/VGA Act-Monitor: When Enabled, any video activity restarts the global timer for Standby
Mode.
Soft-Off by PWR-BTTN: Available options are “Instant-Off” and “Delay 4 sec.”. For “Instant-
Off” option, the power of the system will be switched off at once when the power button is
pressed for turn it off. For “Delay 4 sec.” Option, the power of the system will be switched off
with 4 seconds later after the power button is pressed.
Power On by Ring: When Enabled the external modem ring in can wake up the system. (ATX
power supply required)
Resume By Alarm/Date (of Month) Alarm/Timer (hh:mm:ss) Alarm: To Enabled the Resume
by Alarm will wake up the system at the time set on the Date (of Month) Alarm and Timer
(hh:mm:ss) Alarm.
Wake Up On LAN: When Enabled the wake up packet received by network card can wake up
the system (ATX power supply required).
IRQ 8 Break Suspend: You can select Enabled or Disabled monitoring of IRQ8 (the Real Time
Clock) so it does not awaken the system from Suspend Mode.
Note:
IRQ8 Break Suspend must to be Enabled when you want to use Resume By Alarm
and Ring.
Reload Global Timer Event: When Enabled, an event occurring on each device listed below
restarts the global time for Standby Mode.
IRQ[3-7,9-15], NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floppy Disk
Serial Port
Parallel Port
