manualshive.com logo in svg

DTK PAM-0066I, Руководство пользователя

Поделиться
Скачать
DTK PAM-0066I Скачать руководство пользователя страница 60

Chapter 6

 

 

 

 

54

7.2 

DESKTOP MANAGEMENT INTERFACE (DMI)  

 

OVERVIEW 

 

This motherboard can support DMI within the BIOS level.  DMI is able to auto-detect 
and record information pertinent to a computer’s system such as the CPU type, CPU 
speed, and internal/external frequencies, and memory size.  The onboard BIOS will 
detect as many system information as possible and store those collected information in a 
4KB block in the motherboard’s flash EPROM and allow the DMI to retrieve data from 
this database. 
 
The DMI Configuration Utility (DMICFG.EXE) must be used in real mode in order for 
the program to run, the base memory must be at least 180K.  Memory managers like 
HIMEM.SYS (required by windows) must not be installed.  You can boot up from a 
system diskette without AUTOEXEC.BAT and CONFIG.SYS files, “REM” 
HIMEM.SYS in the CONFIG.SYS, or press <F5> during bootup to bypass your 
AUTOEXEC.BAT and CONFIG.SYS files. 

 

Using the DMI Configuration Utility

 

 
Edit DMI 

 

 

 

Содержание PAM-0066I




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды