AEON-LT HEVC 4K Transmitter
Commercial in Confidence
Revision: 1.0
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
Any copying or reproduction in any form whatsoever is prohibited without the written permission of DTC.
© 2018 Copyright Domo Tactical Communications (DTC) Limited. All rights reserved.
Page 5-12
Audio
Sub-Menu
Options
Description
Audio Input Ch1
Audio Input Ch2
Audio Input Ch3
Audio Input Ch4
Test Tone
Embedded
Analogue 1
Analogue 2
The audio source.
Audio Ch1 Mode
Audio Ch2 Mode
Audio Ch3 Mode
Audio Ch4 Mode
Off
MPEG L1
MPEG L2
AAC-LC
LPCM 16-bit
LPCM 20-bit
LPCM 24-bit
The audio encoding format.
Audio Gain Ch1 L
Audio Gain Ch1 R
Audio Gain Ch2 L
Audio Gain Ch2 R
0-40dB
Gain can be applied if the source is at low level.
Audio P48 Ch1 Left
Audio P48 Ch1 Right
Audio P48 Ch2 Left
Audio P48 Ch2 Right
Off
On
48V phantom power can be applied to the microphone, if required.
Audio PTS Offset
0-1000
May need to be adjusted to achieve lip sync.
Service
Sub-Menu Options
Description
Program
Number
Default – 1
Transport streams have programs. This is a number to
identify the program.
Service
Name
Default – Service 1
Transport streams may be made up of several services.
This is a name to identify the service.
Video PID
Default – 100
This sets the PID for the video content. The Video PID is
listed in the PMT.
Audio Ch1
PID
Audio Ch2
PID
Audio Ch3
PID
Audio Ch4
PID
Default – 200/201/202/203
This sets the PID for the audio content. The Audio PID is
listed in the PMT.
PCR PID
Default – 250
This sets the PID for the Program Clock Reference that is
used to synchronize the audio and video. The PCR PID is
listed in the PMT.
PMT PID
Default – 251
This sets the PID for the Program Map Table. For each
Program, there is one PMT.
