AEON-LT HEVC 4K Transmitter
Commercial in Confidence
Revision: 1.0
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
Any copying or reproduction in any form whatsoever is prohibited without the written permission of DTC.
© 2018 Copyright Domo Tactical Communications (DTC) Limited. All rights reserved.
Page 5-10
5.
OLED Control and Monitoring
5.1
Introduction
An OLED display and control buttons provide full control and monitoring of the AEON-LT. This chapter
describes how to navigate the menu structure and edit settings.
5.2
Control Button Functions
Six control buttons are located to the left of the OLED to let you navigate, select and edit the AEON-LT menu
structure.
The four buttons with arrow indicators are for navigation and editing.
The button indicated with a tick (
) is for selection and save.
The button indicated with a cross (×) is to go back a menu level, or cancel an edit without saving.
5.3
Menu Structure
5.3.1
Overview
On power up, the AEON-LT OLED will present the
Status
page after approximately one minute boot up time.
Press the cross (×) button to go to the top-level menu.
Scroll through the top-level menu by pressing the up/down arrow buttons. If you select
Status
and press the
tick (
) button, it will take you back to the opening display.
The following sections give an overview of the
Status
,
Config
and
Unit
parameters.
