OPERATION
Mounting the Cradle
The VESA Mount Cradle supports VESA standard mounting options (75 mm x
75 mm). Mount the cradle on a stand, bracket, or VESA arm.
Inserting the Tablet into the Cradle
1. Push the latch on the back of the cradle
to release its Top Clasp.
2.
Insert the bottom part of the Tablet into
the cradle with the prongs lined up
correctly.
3.
When the bottom of the Tablet is in place,
push the Tablet against the back and into
the cradle.
4. Push down on the Top Clasp so the top
portion of the cradle slides down and
locks into the locked-down position.
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
http://www.dtresearch.com
Copyright © 2015, DT Research, Inc. All Rights Reserved.
BOG 090315 391WMCENG
Releasing the Tablet from the Cradle
1. Push the latch to release its Top Clasp.
2.
Using two hands, hold the Tablet on both sides, pull up and the top
portion of the cradle will pull up simultaneously.
3. Remove Tablet from the Cradle.
*
NOTE:
If your stand or arm is 100 x 100 VESA, the VESA Conversion Bracket is needed.
Please place the VESA Conversion Bracket on the back side of the Cradle, and apply the
four M4 screws.
